Neutralise the micro-organisms that are not affected by chlorine and salt
No unpleasant chlorine smell
No more red eyes, dry skin or damaged hair
Easier pool maintenance: simple and reliable
Prolongs pool life – will not affect equipement and is compatible with all types of materials (pool liner, filters...)
Environmentally friendly
Your savings :
Drastically reduce chemical use
Lamp replacement every 3 years
Easy and quick installation and maintenance
The sun emits invisible light - ultraviolet light. Using leading edge technology, this natural phenomenon is reproduced inside the sanitisers of the Delta UV product range using powerful UV-C ray lamps. At 254 nanometers, the optimum wavelength for destroying micro-organisms (viruses, bacteria, algae, yeast, mold, etc.), UV-C rays penetrate and disrupt their DNA, permanently deactivating the germ cell metabolism so that they cannot reproduce.
BIO-UV STAINLESS STEEL SERIES REACTORS
Description
Max. flow rate in m3/h*
Performance in millijoules per cm2 at actual recommended flow rate**
UV Lamp : Number Power Consumption
Inlet/outlet Diameter in mm
Height of reactor in cm
Diameter of reactor in cm
UV 10
7
30 mJ/cm2
1 x 33 W
50
42,5
15
UV 20
12
30 mJ/cm2
1 x 55 W
50
69,5
15
UV 30
20
30 mJ/cm2
1 x 87 W
63
94
15
UV 40
25
30 mJ/cm2
1 x 105 W
75
120
15
UV 3000 HO
33
30 mJ/cm2
3 x 87 W
63
96
15
UV 3205 HO
45
30 mJ/cm2
3 x 87 W
75
98
20
UV 4205 HO
65
30 mJ/cm2
4 x 87 W
75
98
20
UV 5205 HO
85
30 mJ/cm2
5 x 87 W
75
98
20
UV 6205 HO
95
30 mJ/cm2
6 x 87 W
75
98
20
UV 6273 HO
130
30 mJ/cm2
6 x 87 W
75
101
27
*Contact us for other flow rates. ** The performance of these devices have been calculated at the end of the lamp's life and with a transmission of 98%.
Advantages :
Specially adapted reactors made from mirror-polished 316L stainless steel, optimized with UV-C lamps using state of the art technology with high-intensity (HO) performance.
Very long lamp service life (13 000 hours depending on the number of switchings on)
Dedicated electronic ballasts guaranteeing maximum lamp UV efficiency and integrated control
Single-base lamps and patented sealing system for an easy maintenance
Lamp operating indicator light for each lamp
Insignificant pressure loss
Inlet/outlet connections using unions supplied
Drain plug
Fastening lugs
Maintenance : lamp change and cleaning of the quartz sleeve very quick and simple
Delta UV E&ES RANGE
E&ES UV Model
Max. Flow Rate US GPM
Max. Flow Rate m3/h
UV dose in millijoules per cm2 at actual recommended flow rate
Pressure max.
UV Lamp Power
Diameter of Reactor
Total height
Inlet/Outlet diameter PVC Union
E&ES 5
31
7
30 mJ/cm2
40 psi - 3 bars
1 x 35W
8" / 203 mm
17,75" - 450,8 mm
2" / 63 mm
E&ES 10
57
13
30 mJ/cm2
40 psi - 3 bars
1 x 45W
8" / 203 mm
24,75" - 627 mm
2" / 63 mm
E&ES 20
80
18
30 mJ/cm2
40 psi - 3 bars
1 x 90W
8" / 203 mm
38,87" - 987 mm
2" / 63 mm
E&ES 40
110
25
30 mJ/cm2
40 psi - 3 bars
1 x 110W
8" / 203 mm
46" - 1168 mm
2" / 63 mm
E&ES Series Specifications :
Power supply: 120/240V/50/60hz
Housing: E series-special 8’’ PVC plastic
ES series-special 8’’ PVC plastic with stainless steel reflective inner liner & mirror polished stainless steel outer cladding
Ballast: electronic
Lamp: high output – low pressure, long life (13,000 hrs.)
Pressure gauge: yes
Indoor/Outdoor installation: yes
Limited warranty: 3 years ES-series / 2 years E-series (1 year lamp)
Plumbing options: 63 mm or 2’’ PVC unions
Delta UV EA RANGE for spas
EA UV Model
Max. Flow Rate US GPM
Max. Flow Rate m3/h
UV dose in millijoules per cm2 at actual recommended flow rates
Pressure Max.
UV Lamp Power
Diameter of reactor
Total Height
Inlet/Outlet diameter PVC Union
EA 3H 5
11
2,4
30 mJ/cm2
40 psi - 3 bars
1 x 35 W
3"/76mm
18" - 450 mm
2"/63 mm
EA 3H 10
20
4,6
30 mJ/cm2
40 psi - 3 bars
1 x 45 W
3"/76mm
25" - 630 mm
2"/63 mm
EA 3H 20
28
6,4
30 mJ/cm2
40 psi - 3 bars
1 x 90 W
3"/76mm
39" - 990 mm
2"/63 mm
EA 3H 40
32
7,2
30 mJ/cm2
40 psi - 3 bars
1 x 110 W
3"/76mm
46" - 1170 mm
2"/63 mm
EA 4H 5
16
3,6
30 mJ/cm2
40 psi - 3 bars
1 x 35 W
4"/101mm
18" - 450 mm
2"/63 mm
EA 4H 10
31
7
30 mJ/cm2
40 psi - 3 bars
1 x 45 W
4"/101mm
25" - 630 mm
2"/63 mm
EA 4H 20
42
9,5
30 mJ/cm2
40 psi - 3 bars
1 x 90 W
4"/101mm
39" - 990 mm
2"/63 mm
EA 4H 40
47
10,7
30 mJ/cm2
40 psi - 3 bars
1 x 110 W
4"/101mm
46" - 1170 mm
2"/63 mm
EA SERIES SPECIFICATIONS
Power supply: 120/240V/50/60hz
Housing: 4’’ stainless steel
Housing unions: 6’’ for housing disassembly to facilitate easy cleaning of the quartz tube
Ballast: electronic
Lamp: high output – low pressure, long life (13,000 hrs.)
Indoor/Outdoor installation: yes
Limited warranty: 1 year UV unit and lamp
63 mm or 2’’ PVC unions
Plumbing options: 3/4’’ unions
Remanent procedure
During the filtration cycle the water passes through the reactor where ultraviolet rays are emitted (it’s a physical process) : water is thus disinfected. However swimmers and different external phenomenons bring numerous micro-organisms that will pollue pool water. So it will be necessary to make water disinfectant between 2 treatments through the reactor. To make this stage easier BIO-UV designed a dosing pump which injects every day a small quantity of product that disinfects and prevents against algae appearance and calcium deposits. Thanks to the combination of UV-C and OXYGENE REMANENT action, this complete process allows that water is disinfected and disinfectant for the greatest comfort of swimmers. OXYGENE REMANENT is particularly advised for interior pools, seldom used ones (second home) and pools equipped with diatom filters. An alternative solution : you can inject every day a formula based on bromine thanks to a brominator. In order to respect running legislation, water can be disinfectant with chlorine or bromine in the case of public and/or commercial pools. Injected doses are thus halved and limit uncomfortable residues and secondary effects linked to the use of halogen products. Ultraviolets are very interesting since it destroy a part of the by-products generated by the use of these molecules (chloramines).
